We are the best supplier.
en English▼                Tel:+86 138 2612 1806     X      

NewsProduct News

For iphone 6s disassembly issue

iphone 6s disassembly issue

i’ve taken a part a rehabbed over a dozen 6s iphones, so i think i’ve got a pretty good handle on the procedure.

  • iphone 6s disassembly issue

I removed the pentagonal screws, took the two trusty ring suction cups and wedges, and tried to separate the screen from the body.

It started giving way on the right side (with the screen facing me with the home button on top) so I slid the paddle further into the bottom (across the home button) and left.

what gave me concern was how it slid straight across the bottom – no blockage by the pentalobe screw tabs. but by the time i really noticed it, the pick was over to the left side.

so i pried and looked closer and rather than separate the complete screen assembly from the base, i only managed to separate the front glass from the screen frame. this separation goes from the bottom of the screen to about half-way up on each side.

if i keep separating, i’ll likely run the risk of shearing some of the flex cables for the whole display. will need a new display anyway, but very worried about the home button cables.

is there a technique where i can still separate out the screen frame from the base? or am i pretty much doomed to wreck the LCD digitizer risk damaging key flex cables?

OK, if you need to purchase mobile phone LCD assembly and spare parts, please contact us



Leave a Reply

Get a Quote ?